Din 912 Specification Pdf . It is divided into long and short sides. Page4 din 912 table 1.
New Fastener LLC » DIN 912 socket
Tolerance s *** 0.7 ef8 0.9 js9 1.3 k9 1.5 d9 d10 2 2.5 d10 3 d11 d11 4 e11 5 6 8 e11 10 e12 12. Din 912 hexagon socket cap screws. 30,0 36,0 40,0 45,0 k max.
New Fastener LLC » DIN 912 socket It is divided into long and short sides. Din 912 iso 4762 8.8 standard withdrawn bn 272 hex socket head cap screws fully threaded steel 8.8 black • ~uni 5931 • ~csn 021143 m18; A hex key (otherwise known as an allen key) is required to fit these. It is a tool with a 90° bending.
If a standard has been withdrawn and no replacement specification is listed, either the specification was withdrawn without replacement or a replacement specification could not be identified. (continued) thread size d reference dimension m 10 32 16 16,27 15,73 10 9,78 9,15 10 9,64 8,025 8,175 15,33 m 12 m 12 x '*25 30,0 36,0 40,0 45,0 k max. Iso.
Din 912 hexagon socket head bolts should be installed and disassembled using a hexagonal wrench. Diameters ranging from m1.6 to m48, in coarse and fine thread in lengths up to 320mm, in steel and stainless steel a2 and a4. • all that said, an m10 x 50 din 912 is going to be equivalent to a m10 x 50 iso.
The din standards remain common in germany. (continued) thread size d reference dimension m 10 32 16 16,27 15,73 10 9,78 9,15 10 9,64 8,025 8,175 15,33 m 12 m 12 x '*25 Item din 912 7991 item din 913 914 916 915 966 *tolerance zones for socket set screws **tolerance zones for socket head cap screws note: A hex.
When the short side is used to install the screw, the longer side can be used to hold the smaller the force can achieve the function of tightening screws. 30,0 36,0 40,0 45,0 k max. Product metric specification type din iso ansi/asme scope 931 4014 partially threaded 933 4017 fully threaded 960 8676 partially threaded (fine) hcs 961 8765 b18.2.3.1m.
Every care has been taken to ensure that the file is suitable for use by iso member bod ies. When the short side is used to install the screw, the longer side can be used to hold the smaller the force can achieve the function of tightening screws. (continued) thread size d reference dimension m 10 32 16 16,27 15,73.
Metric din 912 hexagon socket head cap screws are available for immediate shipping from stock: Not included in iso 4762 article# d1 d2 k s t min. Tolerance s *** 0.7 ef8 0.9 js9 1.3 k9 1.5 d9 d10 2 2.5 d10 3 d11 d11 4 e11 5 6 8 e11 10 e12 12.
Din 912 standard specifies product grade a hexagon socket head cap screws with metric screw threads and thread diameters from h419j~qmmm\.if, in exceptional cases, the screws are to meet requirements other than those given in this standard, these shall be selected in accordance with the appropriate standards. Socket head cap screws are a more modern alternative standard machine fastener to.
Tolerance s *** 0.7 ef8 0.9 js9 1.3 k9 1.5 d9 d10 2 2.5 d10 3 d11 d11 4 e11 5 6 8 e11 10 e12 12. Iso 4762 and din 912 has the same material, dimensions, length tolerance, thread length, torque etc. Din iso din 912 specifications all measurements in millimeters (mm) d1 t min s k max d2.
Product metric specification type din iso ansi/asme scope 931 4014 partially threaded 933 4017 fully threaded 960 8676 partially threaded (fine) hcs 961 8765 b18.2.3.1m fully threaded (fine) hex nuts 934 4032 b18.2.4.1m (style 1) classes 6, 8, & 10 shcs 912 4762 b18.3.1m bh shcs n/a 7380 b18.3.4m fhscs n/a 7991 b18.3.5m Din 912 hexagon socket head bolts should.